Category: Extended Surface Rigid Filters

Aeolus Mini Pleat M11

[ Panel Air Filters ]

The Aeolus Synthetic Mini Pleat Panel Filter gives you an incredible amount of media area having 4 to 5 times the area of most pleated filter of the same size. Together with being 100 % waterproof and having industry leading product rigidity and blow out strength you will experience superior air quality and long service life. Aeolus Filters are built to last and perform even in the toughest applications.

DESIGN. Aeolus 2 inch Mini Pleat Panel Filters feature synthetic microfiber filter media with a 3-dimensional, progressive design for optimum dust holding capacities.

APPLICATIONS. Aeolus 2 inch Mini Pleat Panel Filters are used in a variety of applications where technical reliability and a long service life are a must. From HVAC systems in office buildings, schools and factories to the extreme environment of hazardous waste removal and reclamation, Aeolus offers solutions for all your filtration challenges. The high efficiency Aeolus filters allow the replacement of glass fiber filters, even in sensitive applications such as the pharmaceutical industry, health care facilities and as pre-filters in clean rooms. Aeolus services all applications with now downstream release of shedded fibers. Due to the 100% synthetic construction Aeolus offers unsurpassed performance in humid and wet environments.

Spec Sheet

Sizes

Buy

Mini Pleat M11-15

[ Pleated Panel Air Filters ]

The Airflow MiniPleat extended surface selfsupported filter is designed for use in air filtration systems and equipment with MERV 11 – 15 filtration efficiency requirements. Available in a wide variety of standard sizes and 2” & 4” depths, the AIRFLOW MINI PLEAT provides optimal performance especially in variable air volume/variable airflow systems and LEED accredited buildings.*

Typical Applications
For use as a pre-filter for HEPA and high efficiency final filters, or as a stand-alone primary filter in:

•Hospitals & ICU’s (primary or prefilter for HEPA filtration)
•Pharmaceutical & Cleanroom Facilities (primary or prefilter for HEPA filtration)
•Laboratories
•Printing Facilities
•ŠŠIndustrial Production Plants
•Educational Facilities
•Food Processing Plants
•MERV 13 and higher filter for LEED*
•Accredited Facilities
•Museums and Archive Storage

Spec Sheet

Sizes

Buy

Camfil ESB

[ V-Style Filter ]

V-style air filters offer high efficiency micro fine media in multiple filter banks arranged in a V-shape. This configuration can increase the media area significantly when compared to standard box filters or short depth bag filters reducing system pressure drop significantly. Unique dual layer media in the strongest moisture resistant beverage board enclosing frame.

• Dual headers for front loading filter installations
• Lowest Life-Cycle Cost (LCC) filter available
• Fine fiber ensures that the filter will maintain efficiency throughout its life in the system
• Lowest initial pressure drop of any dual header box style air filter

Description: High capacity, high efficiency, V-style air filter in an all plastic enclosing frame.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers that require a filter with dual headers.
Efficiency: MERV 11, MERV 13, MERV 14 and MERV 16 and a MERV-A of 11, 13 14 and 16 respectively.
Media: Microfine glass media in a mini-pleat design formed into multiple V-bank media packs.
Recommended final pressure drop: 1.50" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 175º F (79° C).
Ratings: ECI value of five stars, UL 900.

Spec Sheet

Sizes

Buy

Camfil Aeropac Filter

[ Box Style Rigid Media Filters ]

The Camfil Riga-Flo series of air filtration provides supported media that is unaffected by varying airflow of VAV systems and continued media support through system start-ups and shut-downs.

Description: High efficiency box style air filter with wet-laid paper style media in an all-metal enclosing frame.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, MERV 14 and MERV-A of 11, 13 and 14 respectively.
Media: Microfine glass media formed into full pack depth pleats separated by corrugated aluminum separators.
Recommended final pressure drop: 1.50" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (90° C).
Ratings: ECI value of four stars, UL 900.

Spec Sheet

Sizes

Buy

Camfil Riga-Flo Box Filter

[ Box Style Rigid Media Filters ]

• Supported media unaffected by varying airflow or turbulence. Microfine high loft media blanket has long life and maintains efficiency throughout the life of the filter. Best in class, saves enery and lasts longer than other box style filters. Guaranteed to 10" w.g. for the highest structural integrity of any box style filter. .
.
Description: High efficiency supported media box filter. .
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers. .
Efficiency: MERV 9, MERV 11, MERV 13, MERV 14 and MERV-A of 9, 11, 13 and 14 respectively. .
Media: Microfine glass media in a uniform high loft media blanket with a synthetic micro mesh media backing. (Non-metallic media backing). .
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point. .
Temperature: Maximum continuous operating temperature of 200º F (93° C). .
Ratings: ECI value of four stars, UL 900. .

Spec Sheet

Sizes

Buy

Camfil Opti-Pac

[ 4" deep high efficiency filter for space-limited applications. ]

• Short depth high efficiency filter saves valuable space in air handlers and conserves warehouse space.
• Fine fiber ensures that filter maintains efficiency throughout its life in the system.
Description: 4" deep high efficiency air filter in a high wet-strength beverage board frame. .
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers. .
Efficiency: MERV 11, MERV 13, MERV 14 and MERV-A of 11, 13 and 14 respectively. .
Media: Microfine glass media in a mini-pleat design bonded into a beverage board holding frame. .
Recommended final pressure drop: 1.50" w.g. when operated at 500 fpm. System design may dictate alternative change-out point. .
Temperature: Maximum continuous operating temperature of 175º F (79° C). .
Ratings: ECI value of three stars, UL 900. .

Spec Sheet

Sizes

Buy

Camfil Durafil ES2 4V Filter

[ V-Style Filter ]

Durafil 4V The Camfil Farr Durafil 4V provides high-efficiency ASHRAE performance in a compact, energy-efficient design. The Durafil 4V: • Includes a wet-laid, microfine glass media in a unique pleat-in-pleat V-bank design with up to 200 square feet of media area (more media than any other ASHRAE grade filter) for higher dust-holding capacity, longer system life and a lower average pressure drop. • Is available in four standard efficiencies • Media is water resistant. • Includes glass filament separators to ensure uniform airflow throughout the media pack. • Incorporates a unique sealant channel ensuring media pack-to-frame bonding to prevent air bypass. • Includes a high-strength, impact-resistant plastic enclosing frame with modular plastic media pack supports, ensuring a rigid and durable filter. • Includes a one-inch header for added stability and a secure fit into the filter holding mechanism. The header is an integral component of the frame. • Includes a header sealing gasket to ensure no air bypass between headers in multi-filter systems. • Is bi-directional, airflow can be in either direction. • Can serve systems with airflow capacities to 3,000 cfm and has a maximum recommended final pressure drop capability to 2.0” w.g. • Is guaranteed to 10” w.g. • Has been qualified by Underwriters Laboratories as UL 900 – Class 2 • Is available with dual headers. The Durafil 2V is excellent for VAV systems, air-starved systems, or any commercial, medical, or industrial application where energy savings is a consideration.

Spec Sheet

Sizes

Buy

Camfil Riga-V PH

[ Box Style Rigid Media Filters ]

• Supported media, in a unique "pleat within a pleat" configuration, unaffected by varying airflow or turbulence
• Low initial pressure drop and low cost per unit make the Riga-V PH an economical choice for commercial applications
• Includes 1" nominal header for side access or rear access built-up banks

Description: High efficiency supported media box filter with header for side access installations.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, and MERV 14.
Media: Lofted synthetic media formed into 2" deep mini-pleats and assembled into a V-bank filter configuration.
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 160º F (70° C).
Ratings: ECI value of three stars, UL 900.

Spec Sheet

Sizes

Buy

Camfil Riga-V

[ Box Style Rigid Media Filters ]

• Supported media, in a unique "pleat within a pleat" configuration, unaffected by varying airflow or turbulence. Low initial pressure drop and low cost per unit make the Riga-V an economical choice for commercial applications.

Description: High efficiency supported media box filter with low initial pressure drop.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, and MERV 14.
Media: Lofted synthetic media formed into 2" deep mini-pleats and assembled into a V-bank filter configuration.
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 160º F (70° C).
Ratings: ECI value of three stars, UL 900.

The Camfil Riga-Flo series of air filtration provides supported media that is unaffected by varying airflow of VAV systems and continued media support through system start-ups and shut-downs.

Spec Sheet

Sizes

Buy

Camfil Riga-Flo PH Filter

[ Box Style Rigid Media Filters ]

• Supported media unaffected by varying airflow or turbulence. Microfine high loft media blanket has long life and maintains efficiency throughout the life of the filter. Includes 1" nominal header for side access or rear access built-up banks.

• Description: High efficiency supported media box filter with header for side access installations.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers. .
Efficiency: MERV 9, MERV 11, MERV 13, MERV 14 and MERV-A of 9, 11, 13 and 14 respectively. .
Media: Microfine glass media in a uniform high loft media blanket with a synthetic micro mesh media backing. (Non-metallic media backing). .
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point. .
Temperature: Maximum continuous operating temperature of 200º F (93° C). .
Ratings: ECI value of four stars, UL 900. .

The Camfil Riga-Flo series of air filtration provides supported media that is unaffected by varying airflow of VAV systems and continued media support through system start-ups and shut-downs.

Spec Sheet

Sizes

Buy

Camfil Durafil Compac

[ Box Style Rigid Media Filters ]

The Durafil Compac is the first high performance 6-inch V-bank air filter ever to be developed. The Compac delivers the optimal benefits of a “V” filter design previously unavailable for units with restricted space.

The Compac allows for easier handling, shorter installation times, requires less storage space and comes with a 40% weight reduction when compared to traditional 12-inch deep V-bank filters. The Durafil Compac is available in three standard efficiencies:

• ASHRAE Standard 52.2 Appendix J ISO Standard 16890

MERV 13/MERV-A 13A ePM1-60%
MERV 14/MERV-A 14A ePM1-70%
MERV 15/MERV-A 15A ePM1-80%

Spec Sheet

Sizes

Buy

Camfil Durafil ES3 3V Filter

[ V Bank-Style Filter ]

High-capacity, high-efficiency, V-bank style air filter in an ABS plastic enclosing frame.

Spec Sheet

Sizes

Buy

Camfil Durafil ES3 4V Filter

[ V Bank -Style Filter ]

High-capacity, high-efficiency, V-bank style air filter in an ABS plastic enclosing frame.

Spec Sheet

Sizes

Buy

Ultra Pak

[ ]

Filter Sales Ultra-Pak ~ Frame: the frame is to be a rigid construction of26 gauge galvanized steel. A heavy gauge, galvanized steel header is optional on the Ultra Pak. Ultra Pak frames are available in two depths 11-1/2” or 5-7/8”. Pleas note these are exact depths. Standard tolerance will be +/- 1/16”. ~ Media pack: The filter media pack shall be constructed by pleating a continuous sheet of microfine synthetic media into uniformly spaced pleats, which are separated by frame retardant, plastic separators. A heavy-duty, thermo-setting adhesive to maintain continuity of the radial pleats. A high density, microfine glass media pack is also available. The expanded metal shall be galvanized to resist rust and corrosion. Metal vertical support brackets shall be utilized to stabilize the media pack and to prevent air bypass. The media will be adhesively bonded on all four sides of the frame to prevent air bypass. Four efficiency ranges are available: 40-45%, 60-65%, 80-85%, and 90-95%. Ultra Pak synthetic filters shall be rated Class 2 under U.L. Standard 900. ~ Separators: Material is to be heavy-gauge, frame retardant plastic. Separators are equipped with air disbursement slots and a rigid spine. The media separators maintain uniform spacing between each pleat to allow for unrestricted air flow. ~ Gasket: gasket material is optional. The placement options are air entry, air exit, air entry and exit. The gasket material is ¾” in width and ¼” in thickness. This resilient material makes for an excellent gasket, which discourages air bypass.

Spec Sheet

Sizes

Buy

Filtration Group FP Mini Pleat Filter

[ ]

FP Mini-Pleat Filter The Aerostar FP Series’ mini-pleat V-Bank™ system was developed in Europe for demanding fine dust applications in high energy cost environments. Today, the Aerostar FP Series fine dust filter is recognized worldwide as the most proven and reliable high technology air filter on the market. Our mini-pleat V-Bank™ technology has proven to be cost effective and highly efficient in removing a wide variety of contaminants from the air stream in industrial, medical, office and original equipment applications. ■ Longer filter life with lower replacement and maintenance costs ■ Eliminates downstream dust and fiber shedding ■ Reduced resistance to air flow promotes significant energy savings ■ Dual direction media for front or reverse mount installations ■ No aluminum spacers to damage the filter media

Spec Sheet

Sizes

Buy

Filtration Group Titan FP Filter

[ ]

Filtration Group Titan FP Filter ~ is constructed with the highest quality components available. The high impact plastic frame, steel struts and micro-glass media work together to form an extremely rigid filter suitable for normal to hostile environments. The Titan FP is designed to be sued in variable air volume (VAV) systems and recommended for use in constant velocity systems as well. ~ Titan FP’s proven V-bank design provides maximum airflow conditions, while providing nearly complete media utilization. Dead spots due to aluminum separators and other restrictions are virtually eliminated. The aerodynamic construction minimizes, and in some cases eliminates, the need for prefiltration. The Titan FP is extremely light, reducing stress on the installer and promoting a safer work environment. The built-in-handle eases transporting the filters to the installation site. ~ The Titan FP is designed to handle nearly all types of conditions: 100% relative humidity, turbulent air flow, intermittent exposure to water, repeated fan shutdowns, desert and marine installations. Titan FP is engineered for hospitals, turbine, industrial, commercial and original equipment applications.

Spec Sheet

Sizes

Buy

Filtration Group Nexfi Mini Pleat Filter

[ ]

The Aerostar® Nexfil® high efficiency mini-pleat air filter is specifically designed to provide high levels of air filtration efficiency to remove pollens, molds, dust, and other airborne irritants. Nexfil’s compact 2" mini-pleat is designed to allow facility engineers to improve air quality and increase IAQ levels without system modification. Nexfil® is cost effective and highly efficient in removing a wide variety of contaminants from the air stream in light commercial, commercial and industrial, civic and education, and hospitality. State-of-the-art synthetic media which is extremely durable High impact plastic frame is moisture resistant and high humidity installations Durable construction eliminates damage during handling and installation Lightweight, easy to transport, install, and can reduce disposal volume

Available in MERV 11, 13, 15

Spec Sheet

Sizes

Buy

V-Cell Box Filter

[ 4-V Cell ]

Viskon-Aire* V Series rigid filters are designed to meet the toughest operating environments. These filter are available as 4v and 3V cell box filters. The V-Series rigid filter can be used in general HVAC systems, automotive assembly plants, hospitals, gas turbines, diesel intakes, pharmaceutical facilities, telecommunication switching stations, and industrial environments where strong rugged performance is required.

The Viskon-Aire* V Series rigid filters are manufactured from rigid ABS plastic components with a class leading media area of 200 square feet. The Viskon- Aire* V Series uses a unique glue bead pattern to maintain the correct pleat geometry that ensures no obstruction to air flow while providing even dirt loading throughout the media pack. Each pack is potted to eliminate any bypass through the filter. The filter media is manufactured from high quality wet-laid glass fibers hydrophobically treated to resist high RH environments. The Viskon-Aire* V-Series has been tested to both ASHRAE 2.2-2012 AND ISO Test Standard 16890

The Viskon-Aire*V Series Rigid Filter Benefits:
Sustainable filter efficiency
•Low pressure drop (ΔP) for better energy efficiency
•Class leading media area 200 Ft2
•High dust holding capacity
•V Pleat Geometry eliminates obstruction to air flow
•All plastic construction
•Microbial resistant - 99% Bacteria Filter Efficiency
•100% RH resistance
•Maximum Temperature 176°F (80°C)

Spec Sheet

Sizes

Buy

V-Cell Box Filter

[ 3-V Cell ]

Viskon-Aire* V Series rigid filters are designed to meet the toughest operating environments. These filter are available as 4v and 3V cell box filters. The V-Series rigid filter can be used in general HVAC systems, automotive assembly plants, hospitals, gas turbines, diesel intakes, pharmaceutical facilities, telecommunication switching stations, and industrial environments where strong rugged performance is required.

The Viskon-Aire* V Series rigid filters are manufactured from rigid ABS plastic components with a class leading media area of 200 square feet. The Viskon- Aire* V Series uses a unique glue bead pattern to maintain the correct pleat geometry that ensures no obstruction to air flow while providing even dirt loading throughout the media pack. Each pack is potted to eliminate any bypass through the filter. The filter media is manufactured from high quality wet-laid glass fibers hydrophobically treated to resist high RH environments. The Viskon-Aire* V-Series has been tested to both ASHRAE 2.2-2012 AND ISO Test Standard 16890

The Viskon-Aire*V Series Rigid Filter Benefits:
Sustainable filter efficiency
•Low pressure drop (ΔP) for better energy efficiency
•Class leading media area 200 Ft2
•High dust holding capacity
•V Pleat Geometry eliminates obstruction to air flow
•All plastic construction
•Microbial resistant - 99% Bacteria Filter Efficiency
•100% RH resistance
•Maximum Temperature 176°F (80°C)

Spec Sheet

Sizes

Buy