Category: Panel Filters



[+] Larger

Aircon Baffle Filter

[ ]

Baffle Grease Filters Continuous grease drain-off reduces fire hazard KITCHEN GUARD® grease filters will not permit grease build-up associated with conventional filters. Special openings allow grease to continually drain and run-off from filter. Eliminates grease drippings Completely safe... eliminates burns to your chef or cook by directing flow of grease to collection trough and not onto grill. Prevents grease-drip bombardment. Excellent performance at low cost. Stationary riveted baffles are in a staggered arrangement so that the grease is deposited directly onto baffles. No moving parts to loosen or break. Sturdy construction means longer life-use. Cleans quickly and easily. Simply wash with soap and water, soak, or wash in dishwasher. Replace old-fashioned, outdated, conventional type filters now! Many States have outlawed the use of mesh filters. Insurance companies are also backing the use of the baffle-type filters to reduce fire hazards. Grease cannot clog or build-up Since KITCHEN GUARD® filter is self-draining, you'll have no worries about grease dripping onto grill. Grease-laden air is drawn into the KITCHEN GUARD® filter by the exhaust fans. As the air goes through the filter, it deposits the grease on the baffles. The grease then runs down the filter and is directed into the collection trough.



Spec Sheet
Sizes | Buy


[+] Larger

Fiberbond Dustlok 3-Ply Panel

[ 3-Ply Panels ]

Fiberbond Dustlok 3-Ply Panel ~ combine Fiberbond Dual-Ply Dustlok media with an open structure air entering media to provide true multi-density depth loading. This assures high dust holding and long service life. The media are securely sealed around a heavy 9 gauge internal grid with two support cross wires. Four parallel seals lock the media around the cross wires. ~ Self-Sealing Design overlaps salvage media edge provides a tight pressure fit into the holding frame. This eliminates dirt by-pass common with the chipboard frame type filters. For side access housing the use of Panel Links. ~ Fiberbond Dustlok adhesive uniformly coats the fibers in the downstream layer during actual media manufacturing. Dustlok will not dry out or migrate. Dustlok renews its effectiveness by absorbing dust particles into the adhesive, trapping them on the surface of individual fibers. There is no drop off in perforemance. ~ Spor-As Antimicrobial Standard with Dustlok Panels & Links is a biocide that effectively controls growth of mold, mildew, algae and fungi on the filter. Fiberbond filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the airstream.



Spec Sheet
Sizes | Buy


[+] Larger

Fiberbond Poly Panel Filter

[ ]

Fiberbond ~ Poly Panel and Panel Link ~ An economical, quality, to layer panel designed for general purpose use. Fiberbond Poly panels are constructed from two layers of polyester media, securely heat sealed around an internal support grid with two cross wires. The downstream media has an adhesive throughout the entire blue layer to enhance dust retention. Poly panels are available in 12 standard sizes along with custom sizes for special applications. A “Master link” consisting of 36 of the same size panel can be cut off at the length needed for use in side access housing. The continuous panel link provides 100% effective face area and eliminates dirt by-pass which can be a problem when using pads, throwaways, or pleats. Benefits – Features -Self-sealing design -100% Effective Face Area -Heat Seal Construction -Unaffected by Moisture -Safe and Easy to handle -No glass fibers -100% polyester media -Depth loading media Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.



Spec Sheet
Sizes | Buy


[+] Larger

Fiberbond Dustlok Master Link Panels

[ ]

Fiberbond Dustlok 3-Ply Panel ~ combine Fiberbond Dual-Ply Dustlok media with an open structure air entering media to provide true multi-density depth loading. This assures high dust holding and long service life. The media are securely sealed around a heavy 9 gauge internal grid with two support cross wires. Four parallel seals lock the media around the cross wires. ~ Self-Sealing Design overlaps salvage media edge provides a tight pressure fit into the holding frame. This eliminates dirt by-pass common with the chipboard frame type filters. For side access housing the use of Panel Links. ~ Fiberbond Dustlok adhesive uniformly coats the fibers in the downstream layer during actual media manufacturing. Dustlok will not dry out or migrate. Dustlok renews its effectiveness by absorbing dust particles into the adhesive, trapping them on the surface of individual fibers. There is no drop off in perforemance. ~ Spor-As Antimicrobial Standard with Dustlok Panels & Links is a biocide that effectively controls growth of mold, mildew, algae and fungi on the filter. Fiberbond filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the airstream.



Spec Sheet
Sizes | Buy


[+] Larger

1/2 & 1 Special Size Fiberglass Throwaways

[ ]

Special Size Fiberglass disposable panel filter has set the standard for quality and durability. This rigidly constructed air filter maintains its integrity where others fall short. ~ Construction: disposable panel filter uses a progressively dense fiberglass or 100% non-woven polyester media to maximize its high dust holding capacity. The media is encapsulated between two metal grids to maintain integrity under adverse operating conditions. The closed corner construction prevents dust laden air from bypassing the media through open corners. The filter frame is clearly marked with size, U.L. classification and air flow direction. ~ Applications: disposable panel filter can be used as a direct replacement for filters supplied in original equipment. Standard sizes are available in 1” and 2” depths to accommodate most filter tracks. Any application can be accommodated with our special sizes, available in 1/2”, 1” and 2” depths. ~ Options: Available with tape around the filter frame for added protection against moisture and/or support bars for added rigidity. ~ Specifications: The standard size filter element shall be constructed of a single piece of heavy-duty, one piece craftboard frame. All corners shall be closed and sealed. The fiberglass filter media shall be coated with a non-toxic, non-flammable, odor.



Spec Sheet
Sizes | Buy


[+] Larger

1/2 & 1 Special Size Dustlok Filter

[ ]

Dustlok Media ~ Dustlok provides the performance of extended surface filters in a unique media design. ~ Distinct Dual Density provides high-dust holding- long service life. The coarse open structure of the white, air entering layer allows true depth loading. The orange, dense, downstream layer effectively stops and traps finer particles. ~ Dustlok Adhesive is a proprietary chemical formulation that uniformly coats the fibers in the downstream layer during the formation of the media. Dustlok absorbs dust particles into the adhesive, trapping them on the surface of individual fibers. Dustlok will not dry out or migrate. Operating temperatures up to 200°F do not affect performance. ~ Spor-Ax Antimicrobial is a biocide that effectively controls growth of mold, mildew, algae and fungi on filters. Filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the airstream.



Spec Sheet
Sizes | Buy


[+] Larger

1/2 & 1 Special Size Polyester Filter

[ ]

Disposable panel filters are rigidly constructed using a progressively dense polyester media to maximize dust holding capacity. Two metal grids are thermally bonded to the internal sides of a heavy-duty, one-piece craftboard frame to maintain the media's integrity under adverse operating conditions. ~ Standard Sizes are available in 1" and 2" depths to accommodate most filter tracks. Any application can be accommodated with our special sizes, available in 1/2", 1" and 2" depths.



Spec Sheet
Sizes | Buy


[+] Larger

2 Special Size Dustlok Filter

[ ]

Dustlok Media ~ Dustlok provides the performance of extended surface filters in a unique media design. ~ Distinct Dual Density provides high-dust holding- long service life. The coarse open structure of the white, air entering layer allows true depth loading. The orange, dense, downstream layer effectively stops and traps finer particles. ~ Dustlok Adhesive is a proprietary chemical formulation that uniformly coats the fibers in the downstream layer during the formation of the media. Dustlok absorbs dust particles into the adhesive, trapping them on the surface of individual fibers. Dustlok will not dry out or migrate. Operating temperatures up to 200°F do not affect performance. ~ Spor-Ax Antimicrobial is a biocide that effectively controls growth of mold, mildew, algae and fungi on filters. Filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the airstream.



Spec Sheet
Sizes | Buy


[+] Larger

2 Special Size Fiberglass Throwaways

[ ]

Special Size Fiberglass disposable panel filter has set the standard for quality and durability. This rigidly constructed air filter maintains its integrity where others fall short. ~ Construction: disposable panel filter uses a progressively dense fiberglass or 100% non-woven polyester media to maximize its high dust holding capacity. The media is encapsulated between two metal grids to maintain integrity under adverse operating conditions. The closed corner construction prevents dust laden air from bypassing the media through open corners. The filter frame is clearly marked with size, U.L. classification and air flow direction. ~ Applications: disposable panel filter can be used as a direct replacement for filters supplied in original equipment. Standard sizes are available in 1” and 2” depths to accommodate most filter tracks. Any application can be accommodated with our special sizes, available in 1/2”, 1” and 2” depths. ~ Options: Available with tape around the filter frame for added protection against moisture and/or support bars for added rigidity. ~ Specifications: The standard size filter element shall be constructed of a single piece of heavy-duty, one piece craftboard frame. All corners shall be closed and sealed. The fiberglass filter media shall be coated with a non-toxic, non-flammable, odor.



Spec Sheet
Sizes | Buy


[+] Larger

2 Special Size Polyester Filter

[ ]

Disposable panel filters are rigidly constructed using a progressively dense polyester media to maximize dust holding capacity. Two metal grids are thermally bonded to the internal sides of a heavy-duty, one-piece craftboard frame to maintain the media's integrity under adverse operating conditions. ~ Standard Sizes are available in 1" and 2" depths to accommodate most filter tracks. Any application can be accommodated with our special sizes, available in 1/2", 1" and 2" depths.



Spec Sheet
Sizes | Buy


[+] Larger

Filtration Group Fiberglass Throwaways

[ ]

Fiberglass disposable panel filter has set the standard for quality and durability. This rigidly constructed air filter maintains its integrity where others fall short. ~ Construction: disposable panel filter uses a progressively dense fiberglass or 100% non-woven polyester media to maximize its high dust holding capacity. The media is encapsulated between two metal grids to maintain integrity under adverse operating conditions. The closed corner construction prevents dust laden air from bypassing the media through open corners. The filter frame is clearly marked with size, U.L. classification and air flow direction. ~ Applications: disposable panel filter can be used as a direct replacement for filters supplied in original equipment. Standard sizes are available in 1” and 2” depths to accommodate most filter tracks. Any application can be accommodated with our special sizes, available in 1/2”, 1” and 2” depths. ~ Options: Available with tape around the filter frame for added protection against moisture and/or support bars for added rigidity. ~ Specifications: The standard size filter element shall be constructed of a single piece of heavy-duty, one piece craftboard frame. All corners shall be closed and sealed. The fiberglass filter media shall be coated with a non-toxic, non-flammable, odor.



Spec Sheet
Sizes | Buy


[+] Larger

Heavy Duty Aluminum Mesh

[ ]

Smith Filters ~ Are made from heavy .rust proof. Aluminum, these mesh filters are designed for the tougher jobs. Thoroughly tested, these filters surpass the requirements of Federal Specifications ASTM F872. Designed with an extra layer of bold corrugation to protect the finer layers behind, these filters can stand up to the hard handling some other lighter filters can’t. Applications include air handling units, both heating and cooling in a wide range of manufacturing plants as well as office buildings. The Smith HEAVY-DUTY Filter can also be used in grease applications where allowed by state regulations. CONSTRUCTION ~ The Smith HEAVY-DUTY Filter shall be processed from sheet Aluminum, commercially known as 3003-H14, .025 thickness, expanded from .031 to .050 strand. Filter shall consist of not less than eight layers of expanded aluminum, including a face layer expanded at .050 strand. Assembled in a way that each layer shall be at right angles with the preceding layer. Each layer of expanded will be corrugated between 1/4. to 3/8. to provide maximum dust holding capacity. The HEAVY-DUTY Filter shall be framed in a formed aluminum channel not less than .040 thickness. Holes shall be punched on one side of frame to facilitate drainage after cleaning. Handles on frame are optional.



Spec Sheet
Sizes | Buy