Category: Pad Media

Dustlok 2 Ply Pad

[ Pad Media ]

Dual-Ply Dustlok Media Fiberbond Dual-Ply Dustlok provides the performance of extended surface filters in a unique media design. Distinct Dual Density provides high-dust holding- long service life. The coarse open structure of the white, air entering layer allows true depth loading. The orange, dense, downstream layer effectively stops and traps finer particles. Dustlok Adhesive is a Fiberbond proprietary chemical formulation that uniformly coats the fibers in the downstream layer during the formation of the media. Dustlok absorbs dust particles into the adhesive, trapping them on the surface of individual fibers. Dustlok will not dry out or migrate. Operating temperatures up to 200°F do not affect performance. Spor-Ax Antimicrobial is a biocide that effectively controls growth of mold, mildew, algae and fungi on filters. Fiberbond filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the airstream.

Spec Sheet

Sizes

Buy

Fiberbond Blue-White Polyester Pad

[ ]

Fiberbond ~ Polyester Media ~ Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. ~ FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.

Spec Sheet

Sizes

Buy

Fiberbond Dry White Polyester Rolls

[ ]

Fiberbond ~ Polyester Media ~ Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. ~ FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.

Spec Sheet

Sizes

Buy

Fiberbond Dry White Polyester Pad

[ ]

Fiberbond ~ Polyester Media ~ Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. ~ FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.

Spec Sheet

Sizes

Buy

Fiberbond Blue-White Polyester Rolls

[ ]

Fiberbond ~ Polyester Media ~ Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. ~ FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.

Spec Sheet

Sizes

Buy

1 1/2 inch Dustlok Panels

[ ]

208.100.0.117

Spec Sheet

Sizes

Buy

Dustlok Media 1" 90 ft Long

[ ]

Spec Sheet

Sizes

Buy

Fiberbond Poly Klean Pad

[ ]

Fiberbond ~ Poly Panel and Panel Link ~ An economical, quality, to layer panel designed for general purpose use. Fiberbond Poly panels are constructed from two layers of polyester media, securely heat sealed around an internal support grid with two cross wires. The downstream media has an adhesive throughout the entire blue layer to enhance dust retention. Poly panels are available in 12 standard sizes along with custom sizes for special applications. A “Master link” consisting of 36 of the same size panel can be cut off at the length needed for use in side access housing. The continuous panel link provides 100% effective face area and eliminates dirt by-pass which can be a problem when using pads, throwaways, or pleats. Benefits – Features -Self-sealing design -100% Effective Face Area -Heat Seal Construction -Unaffected by Moisture -Safe and Easy to handle -No glass fibers -100% polyester media -Depth loading media Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.

Spec Sheet

Sizes

Buy

Fiberbond 25X48 Rigid Pad

[ ]

Rigid Pad Filter Media
MERV 6 • Spor-Ax® Antimicrobial
Cut-To-Size, Ready To Use Rigid Pad

Fiber Bond’s Rigid Pad combines strength, ease-of-use and economy in one synthetic media. It’s the perfect solution when an instant filter is needed.
Custom Sizes Made Easy: A sheet of Rigid Pad can easily be cut to provide a custom filter. No reason to rely on flimsy throw aways or costly 1” pleats.
• Spor-Ax Antimicrobial
• Keeps Filter Media
• Free From Mold, Mildew
• Algae & Fungi

Fiber Bond’s Spor-Ax antimicrobial is part of the manufacturing process, not a costly, post-application. The elimination of microbial growth helps extend service life.

Spec Sheet

Sizes

Buy

Filtration Group Fiberglass Pads

[ ]

Spec Sheet

Sizes

Buy

Service Roll

[ ]

Service Rolls ~ air filtration media are manufactured in selected widths, prepared in roll lengths that make manageable roll sizes. In most cases, a single cut across the roll will produce a ready-to-install filter pad. The following media are offered as service rolls: Spun Glass: This is a rigid, nominal 3/8” thick, dry spun glass. It is typically used to make rigid pads for use in room unit air conditioners. It is designed for use without a frame. Since it is untreated, it will not harm the plastic frequently used in the construction of room units. Foam: A rugged polyurethane foam that is designed for use in room unit air conditioners and in pad-holding frames. It is washable and will withstand repeated cleaning with mild soap and water. Foam service rolls are available in 1/4”, 1/2”, 1” and 2” media thicknesses. They are washable for repeat use. Aluminum: The aluminum service roll is an expanded aluminum mesh of the type used in room unit air conditioners. It is a nominal 1/4” thick dry filter media that requires the addition of a dust adhesive for effective filtration.

Spec Sheet

Sizes

Buy

Polyester Sleeve

[ ]

Sleeve Rolls and Pads
Viskon Aire’s Dual layer sleeve rolls and pads are designed to replace low efficiency lint, plastic foam, or metal washable filters.

Available in 7” to 15” in ½” increments. Length 100’ rolls in dispenser boxes Two layers of progressive density polyester media stitched on two sides Fits on a reusable wire ring which seals easily to prevent air bypass Cut pads available

Spec Sheet

Sizes

Buy