Call: 800.848.9350
|
|
[+]
Longest lasting pocket style filter available in the industry. Proprietary media, exclusive to Camfil, optimized for the highest dust holding capacity. Controlled Media Spacing (CMS) for longer life.
Description: Multi-pocket high efficiency filters with tapered pleats and pocket stitching.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 9, MERV 11, MERV 13, MERV 14 and MERV-A of 9, 11, 13, and 14 respectively.
Media: Microfine glass media in a uniform high loft media blanket with a synthetic micro mesh media backing.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 158º F (70° C).
Ratings: ECI value of five stars, UL Class 2.
View Spec Sheet | 
Available Sizes/Dimensions | 
Buy Now
[+]
Lowest initial and average pressure drop to ensure the lowest energy cost in the industry. May be used without a pre-filter to further reduce energy costs.
Longest lasting pocket style filter available in the industry, less changes and less landfill waste. Proprietary high loft air laid media, exclusive to Camfil, depth optimized for the highest dust holding capacity.
Tapered pockets offer Controlled Media Spacing (CMS) for full use of media area. Transport handle built into carton for ease of filter service. Molded plastic frame, no jagged edges, no pocket damage, no air bypass. Guaranteed to 10" w.g. without filter failure.
Description: Multi-pocket high efficiency filters with tapered pleats and pockets available in 12", 22" and 30" depths.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, MERV 14, and MERV 15 and a MERV-A of 11, 13, 14 and 15 respectively, efficiency maintained throughout the life of the filter.
Media: Proprietary microfine glass media in a uniform high loft media blanket with a micro mesh media backing.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 158º F (70° C).
Ratings: ECI value of five stars, listed as UL 900 by Underwriters Laboratories.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
MERV 13 particle capture efficiency and odor control in one extended surface pocket filter. Excellent for office buildings, retail stores, industrial facilities, medical facilties, shopping centers and schools.
Description: Multi-pocket high efficiency filters with tapered pleats and pocket stitching for the removal of particulates and gaseous contaminants.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 13 per ASHRAE Standard 52.2 and 92% initial removal efficiency on ozone.
Media: Air laid lofted micro-fine glass media with Rapid Adsorption Dynamics carbon embedded within the media.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative change-out point.
Temperature: Maximum continuous operating temperature of 122º F (50° C).
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
High strength synthetic media bag filter that maintains efficiency over time. May be used in hostile environments, moisture, turbulence, etc., operational to 2500 cfm.
Description: Multi-pocket, maintained high efficiency filter with synthetic media for commercial applications.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, and MERV 14 and MERV 11-A, MERV 13-A, and MERV 14-A.
Media: Synthetic media in a uniform high loft media blanket with a permeable media support backing.
Maximum recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design or energy considerations may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 158º F (70° C).
Ratings: UL Class 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Supported media unaffected by varying airflow or turbulence. Microfine high loft media blanket has long life and maintains efficiency throughout the life of the filter. Best in class, saves enery and lasts longer than other box style filters. Guaranteed to 10" w.g. for the highest structural integrity of any box style filter. .
.
Description: High efficiency supported media box filter. .
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers. .
Efficiency: MERV 9, MERV 11, MERV 13, MERV 14 and MERV-A of 9, 11, 13 and 14 respectively. .
Media: Microfine glass media in a uniform high loft media blanket with a synthetic micro mesh media backing. (Non-metallic media backing). .
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point. .
Temperature: Maximum continuous operating temperature of 200º F (93° C). .
Ratings: ECI value of four stars, UL 900. .
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
The Camfil Opti-Pac Durable PH provides high performance particle capture efficiency in those units where 4-inch air filters are possible. The Opti-Pac Durable PH is available in three standard efficiencies: ASHRAE Standard 52.2 Appendix J
• MERV 15/MERV-A 13A View Spec Sheet | Available Sizes/Dimensions | Buy Now 
[+]
High-capacity, high-efficiency, V-bank style air filter in an ABS plastic enclosing frame.
View Spec Sheet | Available Sizes/Dimensions | Buy Now 
[+]
The Camfil Riga-Flo series of air filtration provides supported media that is unaffected by varying airflow of VAV systems and continued media support through system start-ups and shut-downs.
Description: High efficiency box style air filter with wet-laid paper style media in an all-metal enclosing frame.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, MERV 14 and MERV-A of 11, 13 and 14 respectively.
Media: Microfine glass media formed into full pack depth pleats separated by corrugated aluminum separators.
Recommended final pressure drop: 1.50" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (90° C).
Ratings: ECI value of four stars, UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
The Camfil Opti-Pac provides high efficiency air filtration in a space saving 4-inch deep filter pack that can reduce valuable in-line air handler component depth and reduce inventory space requirements. Light weight and easy to handle, the Opti-Pac is available in efficiencies of MERV 11, MERV 13 and MERV 14 per ASHRAE Standard 52.2. and ePM10-70, ePM1-65, and ePM1-70 per ISO Standard 16890. The Opti-Pac:
• Incorporates a wet-laid micro fine glass media in a Close-Pleat™ design for optimum airflow, low system air resistance, and extended service life.
• Maintains its efficiency throughout its life in an HVAC system.
• Has the lowest pressure drop of any fine fiber 4-inch deep mini-pleated filter.
• Includes thermoplastic resin separators ensuring full use of media area and uniform airflow through the filter. Pressure drop increases are minimized resulting in a lower average energy cost.
• Includes a high wet-strength beverage board frame that is resistant to moisture. The frame is bonded to the media around the entire periphery to eliminate air bypass.
• Has diagonal support members on the air-entering and air-exiting sides ensuring filter pack rigidity. The diagonal support members are bonded to the apex of each media pleat to ensure pleat and media stability and assist in providing a strong and durable filter enclosure.
• Is guaranteed against media pack failure to 5.0” w.g. Expensive filter blowouts are eliminated and system cleanliness and integrity are maintained.
• Is available in a variety of sizes for virtually any application.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
High-capacity, high-efficiency, V-bank style air filter in an ABS plastic enclosing frame.
View Spec Sheet | Available Sizes/Dimensions | Buy Now 
[+]
The Camfil Opti-Pac Durable can provide high MERV-A particle capture efficiency in those units where only 2-inch or 4-inch air filters are possible. The Opti-Pac Durable is available in three standard efficiencies: ASHRAE Standard 52.2 Appendix J
2-Inch model View Spec Sheet | Available Sizes/Dimensions | Buy Now 
[+]
• Supported media, in a unique "pleat within a pleat" configuration, unaffected by varying airflow or turbulence
• Low initial pressure drop and low cost per unit make the Riga-V PH an economical choice for commercial applications
• Includes 1" nominal header for side access or rear access built-up banks
Description: High efficiency supported media box filter with header for side access installations.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, and MERV 14.
Media: Lofted synthetic media formed into 2" deep mini-pleats and assembled into a V-bank filter configuration.
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 160º F (70° C).
Ratings: ECI value of three stars, UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Supported media, in a unique "pleat within a pleat" configuration, unaffected by varying airflow or turbulence. Low initial pressure drop and low cost per unit make the Riga-V an economical choice for commercial applications.
Description: High efficiency supported media box filter with low initial pressure drop.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 11, MERV 13, and MERV 14.
Media: Lofted synthetic media formed into 2" deep mini-pleats and assembled into a V-bank filter configuration.
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 160º F (70° C).
Ratings: ECI value of three stars, UL 900.
The Camfil Riga-Flo series of air filtration provides supported media that is unaffected by varying airflow of VAV systems and continued media support through system start-ups and shut-downs.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Supported media unaffected by varying airflow or turbulence. Microfine high loft media blanket has long life and maintains efficiency throughout the life of the filter. Includes 1" nominal header for side access or rear access built-up banks.
•
Description: High efficiency supported media box filter with header for side access installations.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers. .
Efficiency: MERV 9, MERV 11, MERV 13, MERV 14 and MERV-A of 9, 11, 13 and 14 respectively. .
Media: Microfine glass media in a uniform high loft media blanket with a synthetic micro mesh media backing. (Non-metallic media backing). .
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point. .
Temperature: Maximum continuous operating temperature of 200º F (93° C). .
Ratings: ECI value of four stars, UL 900. .
The Camfil Riga-Flo series of air filtration provides supported media that is unaffected by varying airflow of VAV systems and continued media support through system start-ups and shut-downs.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
The Durafil Compac is the first high performance 6-inch V-bank air filter ever to be developed. The Compac delivers the optimal benefits of a “V” filter design previously unavailable for units with restricted space.
The Compac allows for easier handling, shorter installation times, requires less storage space and comes with a 40% weight reduction when compared to traditional 12-inch deep V-bank filters. The Durafil Compac is available in three standard efficiencies:
• ASHRAE Standard 52.2 Appendix J ISO Standard 16890
MERV 13/MERV-A 13A ePM1-60%
MERV 14/MERV-A 14A ePM1-70%
MERV 15/MERV-A 15A ePM1-80%
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Filtration Group ~ HEGA High Efficiency Gas Phase Filters ~ Filtration Group’s HEGA filters are efficient gas phase filters designed to remove a wide variety of odors and common indoor air pollutants at high flow velocities.
■ High contamination removal efficiency
■ Odor control for IAQ applications
■ Available in a variety of styles to fit your HVAC retrofit needs
■ Low pressure drop
■ Virtually no dusting
■ Clean and easy to change
■ Excellent polishing filter in combination with bulk carbon systems
■ Reagent treated carbon options for removal of specific gases, such as ammonia, acid gases and diesel exhaust applications.
■ Patented AQF® media
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
High capacity, low pressure drop, box style filter for nuisance odors, acid gases and diesel emissions
Camfil Farr’s CamSorb RigaCarb will improve indoor air quality by controlling offensive and nuisance odors. The CamSorb RigaCarb deep pleated filter is manufactured from familiar Camfil Farr Riga-Flo components, and is designed to fit anywhere a Riga-Flo, or headered style Riga-Flo can be installed.
Several models of the CamSorb RigaCarb filter are available to treat common odors that may be drawn into high-rise buildings, offices, shops, sports halls, concert halls, hotels, banks, and schools. The filters are designed with features for both make-up and air recirculation applications.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• High capacity, low pressure drop air filter for the removal of low concentration odors and diesel emissions
• Reduce outside air per Indoor Air Quality Method as prescribed in ASHRAE Standard 62.1, Ventilation Standard for Acceptable Indoor Air Quality.
Description: Supported deep-pleated adsorbent media box style air filter.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: Minimum toluene efficiency of of 95% at 500 fpm, 73° F, 50% RH, 80 ppm toluene.
Media: Camfil Rapid Adsorption Dynamics (RAD) carbon.
Recommended final pressure drop: 1.5" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 104º F (40° C).
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Exact replacement for existing commercial odor control systems
• Various medias available dependent upon the contaminant(s) of concern
Description: Commercial level disposable plastic adsorber module designed to remove corrosive gases from make-up air in commercial environments.
Typical applications: Existing side-access housings or built-up bank assemblies.
Efficiency: Media selection dependent, consult factory.
Media: Common Camfil media types include CFS-201, CFS-202, CFS-101/CamPure 4, CFS-002, CFS-103/CamPure 6XL or CFS-004.
Temperature: Maximum continuous operating temperature of 122º F (50° C).
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Recommended for reduction of modest occupancy odor loads and peak-shaving of ambient air pollutants
• Reduce outside air per Indoor Air Quality Method as prescribed in ASHRAE Standard 62.1, Ventilation Standard for Acceptable Indoor Air Quality
Description: V-style cartridge filter with panels of activated carbon for the removal of odors and peak-shaving of ambient air contaminants.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: 60% initial removal efficiency when tested using toluene.
Media: Coconut shell activated carbon. Other adsorbents available, contact factory.
Recommended changeout period: 1 year
Temperature: Maximum continuous operating temperature of 100º F (38° C) and 75% RH.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Filtration Group ~ HEGA High Efficiency Gas Phase Filters ~ Filtration Group’s HEGA filters are efficient gas phase filters designed to remove a wide variety of odors and common indoor air pollutants at high flow velocities.
■ High contamination removal efficiency
■ Odor control for IAQ applications
■ Available in a variety of styles to fit your HVAC retrofit needs
■ Low pressure drop
■ Virtually no dusting
■ Clean and easy to change
■ Excellent polishing filter in combination with bulk carbon systems
■ Reagent treated carbon options for removal of specific gases, such as ammonia, acid gases and diesel exhaust applications.
■ Patented AQF® media
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Filtration Group ~ HEGA High Efficiency Gas Phase Filters ~ Filtration Group’s HEGA filters are efficient gas phase filters designed to remove a wide variety of odors and common indoor air pollutants at high flow velocities.
■ High contamination removal efficiency
■ Odor control for IAQ applications
■ Available in a variety of styles to fit your HVAC retrofit needs
■ Low pressure drop
■ Virtually no dusting
■ Clean and easy to change
■ Excellent polishing filter in combination with bulk carbon systems
■ Reagent treated carbon options for removal of specific gases, such as ammonia, acid gases and diesel exhaust applications.
■ Patented AQF® media
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Filtration Group ~ HEGA High Efficiency Gas Phase Filters ~ Filtration Group’s HEGA filters are efficient gas phase filters designed to remove a wide variety of odors and common indoor air pollutants at high flow velocities.
■ High contamination removal efficiency
■ Odor control for IAQ applications
■ Available in a variety of styles to fit your HVAC retrofit needs
■ Low pressure drop
■ Virtually no dusting
■ Clean and easy to change
■ Excellent polishing filter in combination with bulk carbon systems
■ Reagent treated carbon options for removal of specific gases, such as ammonia, acid gases and diesel exhaust applications.
■ Patented AQF® media
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Filtration Group ~ HEGA High Efficiency Gas Phase Filters ~ Filtration Group’s HEGA filters are efficient gas phase filters designed to remove a wide variety of odors and common indoor air pollutants at high flow velocities.
■ High contamination removal efficiency
■ Odor control for IAQ applications
■ Available in a variety of styles to fit your HVAC retrofit needs
■ Low pressure drop
■ Virtually no dusting
■ Clean and easy to change
■ Excellent polishing filter in combination with bulk carbon systems
■ Reagent treated carbon options for removal of specific gases, such as ammonia, acid gases and diesel exhaust applications.
■ Patented AQF® media
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• MERV 15 particle capture performance and odor control in one supported media filter
• Improves indoor air quality and reduces energy costs
Description: Mini-pleated V-cell air filter for the removal of particulates and gaseous contaminants.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers.
Efficiency: MERV 15 per ASHRAE Standard 52.2 and 95% initial removal efficiency on ozone.
Media: Synthetic filter media with Rapid Adsorption Dynamics carbon embedded within the media.
Recommended final pressure drop: 1.8" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 104º F (40° C).
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
The Camfil Farr GlidePack MultiTrack 25 is a multi-stage air filter
housing with adaptable tracks to apply a variety of prefiltration,
secondary filtration that may include adsorbers, and final filtration
to provide superior indoor air quality for virtually any application.
The housing may also be reconfigured in the field for air filtration
upgrades or to adapt to the latest air filtration technology.
The aluminum air filter mounting track includes ribbed surfaces
to ensure that filters slide easily across the tracks in housing
configurations from four high to six filters wide. The tracks include
slide modifiers that may be moved or removed to change filter
configurations to accommodate a 2” or 4” deep prefilter, a 2”, or 4”
deep intermediate particulate or carbon filter, and a 6” or 12” deep
rigid or pocket final filter. Each Camfil Farr GlidePack MultiTrack
includes:
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
The Camfil Farr Magna-Frame is an individual holding frame designed to ensure that the system efficiency equals the filter efficiency. The Magna-Frame:
• Is constructed of all-welded 14-guage galvanized steel (also available in 304SST). The frame will withstand 30 inch/lb. of sealing torque on the filter element at differentials greater than 10” w.g. without distortion. Sealing integrity is further ensured through the use of welded mitered corners.
• Includes a 1” absolute filter sealing flange to ensure an airtight filter gasket to frame seal.
• Includes annular-based dimples for proper filter alignment. Filter changes are simplified as the filter is centered within the holding frame.
• Includes pre-punched assembly holes for quick and easy assembly. The holes are within the annular dimples to recess assembly bolts or rivets.
• Incorporates vertical side swing bolt assemblies with equi-bearing clamps to provide uniform filter sealing pressure.
• Is available with an optional absolute prefilter kit that allows the installation of an absolute filter, ASHRAE high efficiency filter, and prefilter in one assembly. Absolute filter integrity is not compromised during prefilter service.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
The Camfil Farr SlimLine Series 41 Ducted Ceiling Module is ideal for applications where minimal installation space is available and ultra clean air is a requirement. The Camfil Farr Slimline offers:
• High efficiency leak free particulate control. Available efficiencies include 95% or 99.99% when evaluated on particles 0.3 micron and 99.9995% when evaluated on most penetrating particle size (MPPS).
• A low profile allowing installation in a minimal depth conserving space for manufacturing or other room components. Constructed of light weight extruded aluminum profiles and joined at the corners with Camfil Farr’s Klip-Lok™ mechanism the Slimline installs in any standard 1½ “ or 2” T-bar grid system. Seismic tabs are included.
• A 41-mm filter pack, completely encapsulated in Camfil Farr’s CamPure™ polyurethane sealant. CamPure is thermally/chemically stable to ensure minimal out-gassing and maintains excellent mechanical properties ensuring high-purity air for
the most demanding environments over the life of the filter.
• A media configuration that is optimized through Controlled Media Spacing (CMS™ ) resulting in a lower pressure drop than other media pleating techniques. Continuous glass filament separators, encapsulated in a stabilizing adhesive, promote uniform airflow while eliminating media to media contact and fiber break-off associated with other media pleating techniques.
• An adjustable diffusion disc that promotes uniform airflow over the entire filter and allows filter-to-filter air balancing. Roomside adjustment is accomplished through a port in the center divider. An additional port is included for pressure drop measurement and/or aerosol challenge introduction.
• Either a 10” or 12” collar connection. The collar includes an integral continuous raised ridge to assist in securing flexible ducting.
• An integral white epoxy powder-coated steel grille with 62% open area to promote proper airflow and protect the filter element.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Combines high capacity sorbent canisters with side-access housings for low bypass large system gaseous contaminant control.
• Side-access housing integrity with dual access doors may be up to four filters high by six filters wide.
Typical applications: HVAC system installation in commercial, industrial, manufacturing and medical facilities.
Construction: 16-gauge aluminized steel, gasketed dual access doors, anodized aluminum filter tracks for 2" deep prefilters and separate track for CamCarb Cylinders. Consult factory for stacking and reinforcement guidelines.
Filters: Accepts 2" deep particle prefilter and 16 CamCarb Cylinders per 24" by 24" opening.
Additional data: Out-turned pre-drilled standing flanges mate to other HVAC equipment.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Fasteners are available for Camfil holding frames and housings, or for other manufacturers air filter mounting systems. Our fasteners are designed to ensure that your system air quality is equivalent to the highest level of your system’s filter efficiency. Each fastener contributes to an air tight seal between the mounting mechanism and the air filter (requires the appropriate sealing gasket on the filter or the filter mounting mechanism).
Constructed of high-tensile strength metals Camfil fasteners are unchallenged by the repeated rigors of filter change and maintenance. For challenging environments most fasteners can also be manufactured from alternate materials such as stainless steel, contact factory for more information.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
hardware
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Camfil Farr Magna/Pack: • Is constructed of all-welded 14-gauge galvanized steel (also available in 304SST) and is reinforced with channel bracing to withstand 8.0” w.g. positive or negative pressure without compromising the filter or door seals • Includes standing flanges for mating to HVAC housings or ductwork • Includes water run-off holes to allow for rooftop
or exterior installation without modification to the housing • Includes dual-access doors so filters may be serviced from either side of the housing. Mounted on pin hinges, the doors either swing
open or may be totally removed for convenience of filter service • Incorporates swing bolt filter fastening assemblies with equi-bearing clamps to provide uniform filter sealing pressure. This
method ensures specified filter performance by sealing each filter to leak proof specifications
(recommended 50% gasket compression) • Includes high-memory door gasketing to ensure housing leak free integrity to 8.0” w.g. • Includes replaceable, adjustable, positive clamping fixtures on both doors. The door seal is recreated each time the housing is serviced • Includes a challenge injection port for absolute filter evaluation. Filters are available in efficiencies from 95% to 99.995% at 0.3 microns.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Type 8 Frame ~ Universal Application
The Camfil Farr Type 8 filter holding frame, with a variety of fasteners, will allow the installation of various combinations of ASHRAE prefiltration and final filtration. The installation may include any, or combinations of the following:
• Any 1” deep panel or pleated filter
• Any 2” deep panel or pleated filter
• Any 4” deep panel or pleated filter
• Any 6” or 12” deep rigid filter
• Any headered style rigid or pocket filter
System Integrity
The Camfil Farr Type 8 holding frame includes:
• 16-gauge welded galvanized steel construction.
• A 3/4” filter sealing flange to assure proper filter seating and sealing.
• Filter centering dimples for ease of installation and to assure proper filter to gasket alignment.
• Polyurethane gasketing on the frame to filter sealing surface to assure leak free performance in the most demanding of applications.
• Pre-drilled holes for riveting or bolt-together installation of built-up banks.
• Multiple lances for the application of various fasteners to install a wide variety of standard size air filter.
The Camfil Farr Type 8 holding frame:
• May be assembled in banks up to six units high and any number of units wide (flat stock vertical stiffener bars are required for banks 4 to 6 units high alternating every other filter frame).
• May be applied in applications to remove water or oil mist.
• May be assembled in a V-bank configuration to reduce filter face velocity
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Individually tested standard capacity HEPA filter in an all-wood enclosing frame.
• Unique seamless poured-in-place gasket ensures leak free performance when installed into housings or built-up filter banks.
Description: HEPA grade filter in all-wood enclosing frame.
Typical applications: Built-up filter banks, rooftops, and air handlers in medical facilities, pharmaceuticals, and clean process manufacturing.
Efficiency: 99.97% at 0.3µ to 99.99% at 0.3µ.
Media: Microfine glass media formed into pleats separated by corrugated aluminum separators.
Recommended final pressure drop: Consult factory. Rule of thumb: change filter when the initial pressure drop doubles.
Temperature: Maximum continuous operating temperature of 175º F (80° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Individually tested high capacity HEPA filter in an all-wood enclosing frame.
• Unique seamless poured-in-place gasket ensures leak free performance when installed into housings or built-up filter banks.
Description: High capacity HEPA grade filter in all-wood enclosing frame.
Typical applications: Built-up filter banks, rooftops, and air handlers in medical facilities, pharmaceuticals, and clean process manufacturing.
Efficiency: 99.97% at 0.3µ to 99.99% at 0.3µ.
Media: Microfine glass media formed into pleats separated by tapered corrugated aluminum separators.
Recommended final pressure drop: Consult factory. Rule of thumb: change filter when the initial pressure drop doubles.
Temperature: Maximum continuous operating temperature of 175º F (80° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
View Spec Sheet | Available Sizes/Dimensions | Buy Now 
[+]
• Saves labor and manufacturing downtime with its shorter temperature rise cycle.
• The only HEPA filter that can comply with the most stringent FDA GMP requirements.
• High temperature (650°) HEPA filter with unique floating component design.
Description: High temperature HEPA grade filter with filament thread media separators, ceramic sealant, and ceramic holding frame and glass-braid or rolled glass fiber sealing gasket.
Typical applications: High temperature ovens in pharmaceuticals and clean process manufacturing.
Efficiency: 99.99% at 0.3 micron.
Media: Microfine glass media separated by glass filament media separators.
Recommended final pressure drop: Consult factory. Recommended final pressure drop is 2.0" w.g.
Temperature: Maximum continuous operating temperature of 662º F (350° C).
Ratings: Tested in accordance with EN1822.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Ideal for use in existing systems that require increased airflow
• Close-pleat technology increases filter media area providing a lower resistance to airflow resulting in energy savings.
Description: MERV 16 or HEPA grade filter in a 16-gauge galvannealed steel enclosing frame.
Typical applications: Built-up filter banks, rooftops, and air handlers in medical facilities, pharmaceuticals, and clean process manufacturing.
Efficiency: MERV 16 or 99.99% at 0.3µ.
Media: 7-inch deep mini-pleated microfine glass media pack in a nominal 12" deep enclosure, sealed with fire-retardent polyurethane sealant.
Recommended final pressure drop: Rule of thumb: change filter when the initial pressure drop doubles, or consult factory.
Temperature: Maximum continuous operating temperature of 160º F (70° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filter.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• High filter surface area offers low pressure drop for energy savings and longer life
• Airflow capabilities up to 2400 cfm with low initial pressure drop
Description: High capacity HEPA/ULPA grade filter in an anodized aluminum enclosing frame with seamless poured-in-place sealing gasket
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers in medical facilities, pharmaceuticals, and clean process manufacturing.
Efficiency: 95% to 99.999% at 0.3µ to
Media: Microfine glass media formed into individual mini-pleat media packs and assembled into a V-bank filter configuration.
Recommended final pressure drop: Consult factory. Rule of thumb: change filter when the initial pressure drop doubles.
Temperature: Maximum continuous operating temperature of 175º F (79° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters. UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
CAMFIL XS ABSOLUTE
Camfil standard-capacity absolute filters are manufactured from the highest quality components, under demanding quality control conditions, and they are certified to ensure performance in the most critical of applications. The XS is available in efficiencies from 99.97% to 99.999% on 0.3 micron particles. Typical applications include medical facilities, pharmaceutical manufacturing, electronic component manufacturing, food and dairy processing facilities and many other locations where ultra-clean air is a requirement. Every XSabsolute includes:
• A galvannealed 16-gauge steel frame that creates a durable, dimensionally-stable corrosionresistant enclosure.
• An X-body frame is assembled without the use of penetrating fasteners to ensure leak-free performance throughout the life of the filter.
• Safe-edge corrugated aluminum separators to ensure uniform airflow throughout the media pack and maintain pack stability. The edges of the separators are hemmed for added strength and to protect the media from damage during manufacture, shipping and installation.
• Micro glass fiber media to provide efficiency to specified performance values. The media is highly resistant to moisture in high humidity environments.
• A one-piece seamless urethane gasket to ensure a leak-free filter-to-holding mechanism seal. (A neoprene dove-tailed juncture gasketis also available).
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
The Camfil Absolute VG provides high-efficiency particulate air (HEPA) filtration for critical application processes
in the pharmaceutical, microelectronics, healthcare, semiconductor, food processing, and other industries. Its critical media surface area, more than twice that of standard HEPA filters, provides an optimal combination of high airflow capacity and low resistance to airflow.
The Camfil Absolute VG filter offers:
View Spec Sheet | Available Sizes/Dimensions | Buy Now 
[+]
CAMFIL XH ABSOLUTE
• Individually tested high capacity HEPA/ULPA filter in an enclosure assembled without penetrating fasteners
• Unique seamless poured-in-place gasket ensures leak free performance when installed into housings or built-up filter banks
Description: High capacity HEPA/ULPA grade filter in an all metal 16-gauge enclosing frame.
Typical applications: Built-up filter banks, rooftops, and air handlers in medical facilities, pharmaceuticals, and clean process manufacturing.
Efficiency: 99.97% at 0.3µ to 99.9995% at 0.3µ.
Media: Microfine glass media formed into pleats separated by a corrugated aluminum separator.
Recommended final pressure drop: Consult factory. Rule of thumb: change filter when the initial pressure drop doubles.
Temperature: Maximum continuous operating temperature of 175º F (80° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filter. UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• High temperature Absolute for Class 100 oven validation to 500° F ( 260° C)
• Available in efficiencies of 95%, 99.97% or 99.99% at 0.3µ
Description: High temperature HEPA grade filter with corrugated aluminum separators, silicone sealant, and stainless steel enclosing frame.
Typical applications: High temperature ovens in pharmaceuticals and clean process manufacturing.
Efficiency: 95%, 99.97% and 99.99% at 0.3µ.
Media: Microfine glass media formed into full pleats separated by corrugated aluminum separators.
Recommended final pressure drop: Recommended final pressure drop is 2.0" w.g. Consult factory for more information.
Temperature: Maximum continuous operating temperature of 500º F (260° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters. UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Removes 99% of all known airborne bacteria.
• Same construction and structural integrity as our X-series HEPA filters.
Description: 95% DOP (99% ASHRAE) filter in an all metal 16-gauge enclosing frame.
Typical applications: Built-up filter banks, rooftops, and air handlers in medical facilities, pharmaceuticals, and clean process manufacturing.
Efficiency: 95% at 0.3µ.
Media: Microfine glass media formed into pleats separated by corrugated aluminum separators.
Recommended final pressure drop: Consult factory. Rule of thumb: change filter when the initial pressure drop doubles.
Temperature: Maximum operating temperature of 175º F (80° C).
Ratings: UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• High filter surface area offers low pressure drop for energy savings and longer life
• Airflow capabilities up to 2300 cfm with a low initial pressure drop
• Gel seal to ensure leak free performance when mounted to knife-edge mounting system
Description: High capacity HEPA/ULPA grade filter in an anodized aluminum enclosing frame with gel seal track with elastic gel sealant. Versions available for standard industry mounting systems or specific to Camfil containment housings.
Typical applications: Built-up filter banks, rooftops, split systems, free-standing units, package systems and air handlers in medical facilities, pharmaceuticals, and clean process manufacturing.
Efficiency: 95% to 99.999% at 0.3µ.
Media: Microfine glass media formed into individual mini-pleat media packs and assembled into a V-bank filter configuration.
Recommended final pressure drop: Consult factory. Rule of thumb: change filter when the initial pressure drop doubles.
Temperature: Maximum continuous operating temperature of 155º F (68° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters. UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Low maintained pressure drop for longer filter life. High wet-strength beverage board frame creates a rigid and durable enclosure. Welded wire media backing to maintain radial pleat configuration. Available in 1", 2" and 4" depths. Excellent choice for those who change filters based upon time or PM program.
Description: Medium capacity pleated panel filter.
Typical applications: Prefilters to higher efficiency filters, stand-alone filter for rooftops, split systems, free-standing units and package systems and air handlers.
Efficiency: MERV 8 and MERV-A 8 sustained efficiency when evaluated under ASHRAE Testing Standard 52.2.
Media: Proprietary blend of meia fibers in a uniform lofted blanket.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (93° C).
Ratings: ECI value of three stars, UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
MERV 13 performance in a 2" or 4" depth to meet LEED requirements. Radial pleats with welded wire backing for higher dust holding capacity and longer life. High wet-strength beverage board frame.
Description: High efficiency synthetic pleated media, welded wire media support and Kraft board enclosing frame manufactured under the Sustainable Forestry Initiative.
Typical applications: Stand-alone filter for rooftops, split systems, free-standing units and package systems and air handlers.
Efficiency: MERV 13 per ASHRAE Standard 52.2, meeting current requirements for LEED.
Media: Synthetic fibers in a uniform lofted media blanket.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 150º F (66° C).
Ratings: UL Class 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Lowest cost of ownership for a MERV 11 filter in a pleated filter design. Radial pleats with welded wire backing for higher dust holding capacity and longer life. Biodegradable Kraft board frame creates a rigid and durable enclosure, manufactured under Sustainable Forestry Initiative (SFI). Available in 1", 2" and 4" depths.
Description: High efficiency synthetic pleated media, welded wire media support and Kraft board enclosing frame manufactured under the Sustainable Forestry Initiative.
Typical applications: Stand-alone filter for rooftops, split systems, free-standing units and package systems and air handlers.
Efficiency: MERV 11 per ASHRAE Standard 52.2.
Media: Synthetic fibers in a uniform lofted media blanket.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (93° C).
Ratings: UL Class 2.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
CITYPLEAT
CityPleat panel filters are light duty solutions to suit a wide range of air handling units and housings. They are made from "combination" media and provide removal of both particulate matter (PM) and molecular contamination.
CityPleat filters are constructed from pleated embedded or combination media that provides control of both particles and molecular contaminants. CityPleat panels provide moderate performance and are intended for low impact IAQ and Comfort applications. Filters are available in a range of standard sizes and thicknesses to suit filter tracks or frames in housings. The panels utilise a broad spectrum carbon to provide efficiency against a very wide range of airborne chemicals. The filters operate with a Rapid Adsorption Dynamics (RAD) mechanism that ensures maximum performance against the multiple chemicals that are typically present in city-centre buildings. Typical particle removal efficiency classifications are Coarse 65% according to ISO16890 and MERV 7 according to ASHRAE 52.2. Actual achieved performance will depend on the filter configuration and airflow. CityPleat filters are disposable. Subject to pressure loss compatibility, CityPleat filters can replace conventional pre-filter panels to provide enhanced IAQ using a single filter. CityPleat filters are also commonly used as temporary solutions, for example during short or medium term construction projects.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Unique dual layer media in the strongest moisture resistant beverage board enclosing frame. True MERV 9 maintained efficiency throughout the life of the filter. Radial pleats, welded wire grid backing. Guaranteed to last 12 months in commercial duty applications and 9 months in industrial level applications.
Description: High capacity pleated panel filter available in 2" or 4" depths.
Typical applications: Prefilters to higher efficiency filters, stand-alone filter for rooftops, split systems, free-standing units and package systems and air handlers.
Efficiency: Value of 9 for MERV and MERV-A when evaluated under ASHRAE Testing Standard 52.2. ePM10 of 60%.
Media: Proprietary blend of synthetic fibers in a uniform dual layer lofted media blanket.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (93° C).
Ratings: ECI value of five stars, listed as UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Guaranteed to last longer. True MERV 8 maintained efficiency. Meets all published hospital filter efficiency
guidelines
Description: High capacity pleated panel filter available in 1", 2" or 4" depths.
Typical applications: Prefilters to higher efficiency filters, stand-alone filter for rooftops, split systems, free-standing units and package systems and air handlers.
Efficiency: Value of 8 for MERV and MERV-A when evaluated under ASHRAE Testing Standard 52.2.
Media: Proprietary blend of meia fibers in a uniform lofted blanket.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (93° C).
Ratings: ECI value of five stars, listed as UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Low maintained pressure drop for longer filter life. High wet-strength beverage board frame creates a rigid and durable enclosure. Welded wire media backing to maintain radial pleat configuration. Available in 1", 2" and 4" depths. Excellent choice for those who change filters based upon time or PM program.
Description: Medium capacity pleated panel filter.
Typical applications: Prefilters to higher efficiency filters, stand-alone filter for rooftops, split systems, free-standing units and package systems and air handlers.
Efficiency: MERV 8 and MERV-A 8 sustained efficiency when evaluated under ASHRAE Testing Standard 52.2.
Media: Proprietary blend of meia fibers in a uniform lofted blanket.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (93° C).
Ratings: ECI value of three stars, UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Guaranteed to last longer. True MERV 8 maintained efficiency. Meets all published hospital filter efficiency
guidelines
Description: High capacity pleated panel filter available in 1", 2" or 4" depths.
Typical applications: Prefilters to higher efficiency filters, stand-alone filter for rooftops, split systems, free-standing units and package systems and air handlers.
Efficiency: Value of 8 for MERV and MERV-A when evaluated under ASHRAE Testing Standard 52.2.
Media: Proprietary blend of meia fibers in a uniform lofted blanket.
Recommended final pressure drop: 1.0" w.g. when operated at 500 fpm. System design may dictate alternative changeout point.
Temperature: Maximum continuous operating temperature of 200º F (93° C).
Ratings: ECI value of five stars, listed as UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Combines essential features for high level cleanroom air cleanliness in pharmaceutical and biotechnology facilities.
• Controls and connections are easily accessible from the room side
• Fully welded housing with universal support brackets
• Quick filter change with toolless filter clamps
• Spring-loaded filter retainer clips and filter guides
• Quick-disconnect ports
• Capability to isolate the room during filter change
• Through the selection of many options, fully customizable
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
• Exclusive Controllled Media Spacing (CMS) ensures uniform airflow and even loading over the life of the filter.
• Available as filter replacements for most cleanroom filters, housings and ceiling modules and grid systems..
Description: HEPA/ULPA mini-pleat panel filters for installation in cleanroom ceiling modules or filter housings. Available in 53mm, 70mm or 100mm pack depths. Available with gasket, knife-edge or gel channel for sealing to mounting hardware.
Typical applications: Pharmaceutical and semiconductor manufacturing facilities, medical facilities and other clean process applications.
Efficiency: 95% at 0.3µ to 99.9995% at most penetrating particle size (MPPS).
Media: Microfine glass media, with thermoplastic resin separators formed into a single mini-pleat filter pack.
Temperature: Maximum continuous operating temperature up to 160º F (71° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters. UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Lightweight, compact ducted filter module for clean processes or medical suites. Low pressure drop saves energy and low life-cycle cost reduces disposal costs.
Description: Low profile ducted ceiling module constructed of an anodized aluminum frame and with a galvanized steel back plate. Designed for installation into a T-bar ceiling grid system. Also available with knife-edge frame for gel grid systems.
Typical applications: Pharmaceutical and semiconductor manufacturing facilities, medical facilities and other clean process applications.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Low outgassing, chemically compatible ULPA filter. Media has very high mechanical strength and is resistant to tearing and hostile environments.
Description: Low outgassing, chemically compatible ULPA grade filter available with gasket, gel or knife-edge seal.
Typical applications: Hostile environments, chemical processing, pharmaceuticals and other clean process applications.
Efficiency: 99.99995% at most penetrating particle size (MPPS).
Media: Durable, chemically resistant, hydrophobic polytetraflouroethylene media formed into a mini-pleat filter pack using exclusive Camfil Closepleat manufacturing technology.
Recommended final pressure drop: Consult factory. Rule of thumb: change filter when the initial pressure drop doubles.
Temperature: Maximum continuous operating temperature of 150º F (66° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing ULPA Filters. Rated by Underwriters Laboratories as UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Lightweight, compact ducted filter module for clean processes or medical suites. Low pressure drop saves energy and low life-cycle cost reduces disposal cost.
Description: Low-profile ducted filter module for HEPA/ULPA filters.
Typical applications: Pharmaceutical and semiconductor manufacturing facilities, medical facilities and other clean process applications.
Efficiency: 95% at 0.3µ to 99.9995% at Most Penetrating Particle Size (MPPS).
Media: Microfine glass media, with continuous glass filament separators formed into a single mini-pleat filter pack.
Temperature: Maximum continuous operating temperature of 200° F (93° C).
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters. UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
[+]
Lightweight, compact ducted filter module for clean processes or medical suites. Low pressure drop saves energy and low life-cycle cost reduces disposal costs.
Description: Ducted ceiling module constructed of an anodized aluminum frame with a galvanized steel back plate. Designed for installation into T-bar ceiling grid systems. Also available with knife-edge for gel grid systems.
Typical applications: Pharmaceutical and semiconductor manufacturing facilities, medical facilities and other clean process applications.
Ratings: Tested in accordance with IEST Recommended Practice for Testing HEPA Filters. UL 900.
View Spec Sheet | Available Sizes/Dimensions | Buy Now
© 2018 Filter Sales and Service, Inc.
All rights reserved
Facebook
Instagram