HOME | FIRM PROFILE | CONTACT US | BLOG |



Filter Sales & Service, Inc stocks a comprehensive line of filtration products to meet the needs of our customers. We continually stock new items and products, and also carry custom filtration products and cleanroom supplies from a wide variety of manufacturers. Please feel free to contact one of our office locations, or phone us at 1-800-848-9305 to inquire about products you may need, but may not find on our website.


Spray Booth Filters

ECXL | MFG: Filtration Group

Filtration Group ~ EC-XL Overspray Media ~ The EC-XL media is a 1" polyester media made with a dual layer construction. The combination creates a dual stage filter with the air entry layer of 45 and 100 denier fibers lofted as much as possible to create a generous paint holding layer. The exit stage is a layer of 6 and 3 denier fibers that has been needled and tinted pink to insure proper installation. EC-XL media is available in bulk rolls up to 84" in width and 90' in length. Also available are slit rolls, custom blankets, and standard pads, boxed and ready to be shipped to your plant. The media can also be formed into one, two, and three pocket cubes to provide additional surface area and even more paint holding capacity.

View Technical Sheet View Available Sizes & Prices

Paint Arrestor 3000 | MFG: Research Products

Paint Arrestors

RP Paint Arrestors are disposable paint overspray collectors that efficiently trap paint solids before they reach the exhaust stack. These were the first dry filters specifically designed to control paint overspray. Through the years, the RP family of standard, high efficiency and high capacity Paint Arrestors has proven to be a cost effective, efficient way to handle virtually every overspray requirement. Fabricated of slit and expanded paper, or slit and expanded paper with polyester, the multiple layers of RP Paint Arrestors are assembled so the intake side has larger openings than the exhaust side. This provides depth loading for maximum service life.

Every RP Paint Arrestor including the prefilter series has a new, patented face sheet design. It produces a unique airflow pattern which traps more overspray using less material than previously. You save by:
• Reducing the volume of stored material
• Reducing the number of changeouts
• Reducing down-time, and
• Reducing the amount of material to dispose of.

RP Booth Paper is also available to help maintain a clean working environment in the paint booth. The 300’ Kraft rolls are available in various widths to accommodate virtually any booth size.

As an additional product improvement, RP Paint Arrestors and booth paper have followed the recommendations of the industry consensus N.F.P.A. Standard No. 33, and the currently practiced policies of the Occupational Safety & Health Administration (OSHA) by removing so-called flame-retardant salts. This was done because it is the paint overspray rather than the collector that is flammable. This eliminates toxic gases during incineration as well as phosphates and sulfates leaching out of the landfill. It also helps you meet state and municipal government codes and requirements.

View Technical Sheet View Available Sizes & Prices

Series 55 | MFG: ViskonAire

Viskon-Aire ~ Series 55 ~ A good filter costs less than a bad finish. That’s why Viskon-Aire Series 55 Panel Filters are standard equipment from all leading paint spray booth suppliers. And why they’re specified as replacement filters by major auto, truck, aircraft, and other metal finishers whose finish quality is critical. ~ Our Series 55 Panel Filters can help you, too, because they’ll cut down on paint defects and high finishing costs. They clean your spray booth air of particles down to 5µ with 90% efficiency. ~ A better tackifier: You can even feel the difference. Won’t dry out. And it stays in place. Won’t drip or blow off. ~ High efficiency: Panels extract 100% of visible atmospheric dust and remove 90% of 5µ particles. ~ Self-Sealing Gasket: Filter media overlap in a self-sealing edge that fits flush with holding frame. ~ No gap: a 1/8” gap around a filter passes as much dirty air as a 3” diameter hole right in the middle. Series 55 filters fit tight, prevent bypass of the dirty air (up to 20 or 30%) loose filter frames don’t stop.
U.L Classified: Flammability is rated Class 2. 923X ~ Internal Steel Frame: All welded. It springs into place and stays there. ~ Long service life: Substantially outlasts other filters and spreads installation and replacement costs over a longer lifetime.
Reduced labor costs: Fits frames fast without adaptors or sharp edges. Changes panels quickly, easily. ~ No flutter: Internal wire support and heat-sealed seams won’t let media flutter. Prevents the vibration that’s the major cause of dirt unloading and fiber breakoff.
No fiber breakoff: Both plys are tough, resilient polyester fibers. Not brittle like glass fibers.

View Technical Sheet View Available Sizes & Prices


Main Office: 15 Adams Street - Burlington, MA 08103 | CT Office: 15 Kimberly Ave - New Haven, CT 06516 | Toll Free 800:848-9305



Filter-Replacement Plans Save Energy Improve IAQ
Post on:03/21/2014
Filter Facts: Improve IAQ, Lower Energy Costs
Post on:04/18/2014
Air Filtration for Healthcare Facilities
Post on:04/22/2014
Regular HVAC Filter Changes Saves $$
Post on:10/06/2014