HOME | FIRM PROFILE | CONTACT US | BLOG |



Filter Sales & Service, Inc stocks a comprehensive line of filtration products to meet the needs of our customers. We continually stock new items and products, and also carry custom filtration products and cleanroom supplies from a wide variety of manufacturers. Please feel free to contact one of our office locations, or phone us at 1-800-848-9305 to inquire about products you may need, but may not find on our website.


Extended Bag Filters

Cam-Flo XLT Bag Filter | MFG: Camfil Farr

The Cam-Flo XLT bag filter combines the strength of a multi-layered, polypropylene/polyester media with a reinforced, rigid ABS frame to create a robust air filter that is strong enough for even the most extreme conditions. It has been tested in laboratory conditions to a static pressure exceeding 33.0”w.g. It is ideal for turbulent or high pressure applications where normal HVAC filters would fail. The Cam-Flo XLT offers:

- Superior mechanical strength providing the most robust HVAC air filter available.
- May be operated to 2500 cfm (full size) without sacrificing performance.
- Is capable of withstanding unusual variations in airflow or system turbulence.
- May be used in applications of high moisture content that may be hostile to air filters of standard construction, up to 100% RH.
- Is available in efficiency grades of MERV 11, MERV 13 and MERV 14 when evaluated per ASHRAE Standard 52.2.

View Technical Sheet View Available Sizes & Prices

City-Flo XL Bag Filter | MFG: Camfil Farr

The Camfil Farr City-Flo XL addresses the indoor air quality needs of today’s green buildings and may be applied in applications where particulate and odorous contaminants may be a concern. The City-Flo XL is ideal for removing contaminants associated with harsh urban environments. Additionally, the filter can be applied to reduce outside air during temperature extremes through application of the Indoor Air Quality Procedure as outlined in ASHRAE Standard 62.1, Ventilation for Acceptable Indoor Air Quality.

Its unique tapered pocket design and single-piece casting plastic header ensure the lowest life-cycle cost and maintains integrity through varying airflows or HVAC system turbulence.

The media is constructed from a unique high efficiency fiberglass media bonded to a broad spectrum carbon adsorbent blend to provide efficient dust and odor control. The City-Flo XL has a minimum efficiency reporting value (MERV) of 13 when evaluated per ASHRAE Standard 52.2 to meet the minimum requirement for commercial applications designed to LEED (Leadership in Energy and Environmental Design) as established by the United States Green Building Council (USGBC). It’s fine fiber media maintains rated efficiency throughout the life of the product.

View Technical Sheet View Available Sizes & Prices

Hi-flo Bag Filters | MFG: Camfil Farr

Hi-Flo ~ The Camfil Farr Hi-Flo® offers high efficiency ASHRAE grade filtration to address today's indoor air quality problems. The Hi-Flo can remove contaminants such as fumes, smoke, bacteria, fungi, and virus-bearing droplet nuclei. The Hi-Flo is also the filter of choice for the removal of nuisance contaminants such as pollens, paper dust, and other atmospheric impurities. Hi-Flos are available in the following efficiencies:
High Lofted Air Laid Media
The Camfil Farr Hi-Flo incorporates high lofted air laid micro fiber glass media to ensure reliable efficiency throughout the life of the filter. Its small fiber diameter and uniform lofting results in consistent sub-micron particle capture and a low resistance to airflow throughout the life of the filter. A synthetic micro mesh media backing ensures media protection and support in turbulent or varying airflows. The Hi-Flo's particle capture performance and filter configuration are unaffected by dust loading and/or humidity.
Controlled Media Spacing
Camfil Farr is the only manufacturer to offer controlled media spacing to minimize pocket-to-pocket contact, ensure uniform airflow, and allow full utilization of the media area. The effect results in the lowest life cycle product cost for your facility. Your selection of the length and number of pockets should be based upon the required airflow through the system.

View Technical Sheet View Available Sizes & Prices

Hi-Flo ES Bag Filters | MFG: Camfil Farr

Hi-Flo ~ The Camfil Farr Hi-Flo® offers high efficiency ASHRAE grade filtration to address today's indoor air quality problems. The Hi-Flo can remove contaminants such as fumes, smoke, bacteria, fungi, and virus-bearing droplet nuclei. The Hi-Flo is also the filter of choice for the removal of nuisance contaminants such as pollens, paper dust, and other atmospheric impurities. Hi-Flos are available in the following efficiencies:
High Lofted Air Laid Media
The Camfil Farr Hi-Flo incorporates high lofted air laid micro fiber glass media to ensure reliable efficiency throughout the life of the filter. Its small fiber diameter and uniform lofting results in consistent sub-micron particle capture and a low resistance to airflow throughout the life of the filter. A synthetic micro mesh media backing ensures media protection and support in turbulent or varying airflows. The Hi-Flo's particle capture performance and filter configuration are unaffected by dust loading and/or humidity.
Controlled Media Spacing
Camfil Farr is the only manufacturer to offer controlled media spacing to minimize pocket-to-pocket contact, ensure uniform airflow, and allow full utilization of the media area. The effect results in the lowest life cycle product cost for your facility. Your selection of the length and number of pockets should be based upon the required airflow through the system.

View Technical Sheet View Available Sizes & Prices

S-Flo Bag Filters | MFG: Camfil Farr

S-Flo ~ The Camfil Farr S-Flo offers high efficiency particulate air filtration to address today's indoor air quality concerns. The S-Flo can remove contaminants such as fumes, smoke, bacteria, fungi, and virus-bearing droplet nuclei. S-Flo filters are available in the following efficiencies:
High Lofted Melt-Blown Synthetic Media
The Camfil Farr S-Flo includes a unique melt-blown synthetic media that provides critical capture of particles as small as 0.3 micron. The media incorporates a uniform high loft to provide a lower resistance to airflow than comparable high efficiency air filters. A lightweight scrim media backing ensures protection of the media and prevents media erosion. Stronger than conventional media, the S-Flo can withstand the rigors of turbulent airflow common in certain industrial applications. Performance and configuration are unaffected by dust loading or humidity. The S-Flo may also be used in industrial applications involving chemicals that may be hostile to other types of filters. The S-Flo is also the filter of choice for the removal of nuisance contaminants such as pollens, paper dust, and other atmospheric impurities.
Applications include commercial buildings, medical facilities, and industrial manufacturing facilities.

View Technical Sheet View Available Sizes & Prices

Dustlok 30HC | MFG: Fiberbond

Dustlok 30-HC ~ Fiberbond Dustlok 30-HC is a multi-pocket filter 12 inches in depth. Individual pocket edges and internal dividing bars are welded by means of heat sealing. Pockets are assembled using a modular design with a wrap-around metal frame. The exceptionally high dust holding provides long service life.

View Technical Sheet View Available Sizes & Prices

Dustlok Cube | MFG: Fiberbond

Dustlok Cube ~ Fiberbond Dustlok Cube is an economical upgrade from pleated filters. The tapered star shape design provides 100% media utilization in a 15 inch depth. The pressure fit of the internal 9 gauge wire ring locks the cube in place, preventing by-pass of unfiltered air.

View Technical Sheet View Available Sizes & Prices

Dustlok Cube 440 Cube | MFG: Fiberbond

Dustlok 440 Cube ~ The 440 cube design provides two large tapered pockets for collection of airborne contaminants. Available in a 15 inch depth and a compact 8 inch model when space is a limiting factor. The 9 gauge internal grid and overlapping media seals the cube tightly into the holding frame.

View Technical Sheet View Available Sizes & Prices

Fiberglass Pockets | MFG: Fiberbond

The Aerostar® Fiberglass Pocket is constructed of an ultra-fiberglass fiber media. The media is bonded to a thin non-woven synthetic backing and sewn with multiple rows of expanded stitching. These medium to high efficiency filters can be used in a variety of commercial and industrial applications as well as specialty applications such as oil mist collection, fume collection and collection of heavy concentrated file airborne contaminants

Available in a wide range of sizes, depths and number of pockets.

- Available as a MERV 11, 13 and 16
- Open throat design for optimum air flow
- Low initial pressure drop and superior dust holding capacity
- Galvanized steel header and J-channels for filter strength

View Technical Sheet View Available Sizes & Prices

Multi-wedge 45 H | MFG: Fiberbond

Fiber Bond Multi-Wedge 45 filters are made with a tough, high density polyester media manufactured at Fiber Bond. Designed to withstand the most severe environmental operating conditions. Resistance to high humidity, oil mists, acids, alkalies and most organic solvents. HEAT SEAL CONSTRUCTION All perimeter edges and internal dividers are permanently welded together. This dielectric process assures a leak proof self-supporting pocket. No needle holes for dirt migration downstream. SPOR-AX -NO EARLY CHANGE OUTS Spar-Ax antimicrobial is a proven, highly effective biocide. Spor-Ax controls the growth of mold, mildew, algae and fungi on the filter.

Spor-Ax will not off gas, migrate or leach into the air stream. Mold build up on filter media will increase resistance. No early and unanticipated filter purchases and change outs.

View Technical Sheet View Available Sizes & Prices

Multi-wedge 45 S | MFG: Fiberbond

Fiber Bond Multi-Wedge filters are made with a tough, high density polyester media manufactured at Fiber Bond. Resistant to high humidity, oil mists, acids, alkalies and most organic solvents. HEAT SEAL CONSTRUCTION All perimeter edges and internal dividers are permanently welded together. This dielectric process assures a leak proof self-supporting pocket. No needle holes for dirt migration downstream.

SELF-SEAL FRONT LOAD DESIGN The positive edge self sealing design is used in conventional front access systems. The overlapping media tightly pressure fits against the holding frame. No by-pass around the filter.

View Technical Sheet View Available Sizes & Prices

Multi-wedge 65 H | MFG: Fiberbond

Fiber Bond Multi-Wedge 65 media is a tough, high density polyester manufactured at Fiber Bond. Resistant to high humidity, oil mists, acids, alkalies and mostorganic solvents. The high dust holding capacity makesthe MW65 'H' a stand alone filter. HEAT SEAL CONSTRUCnON Allperimeteredges andinternaldividers arepermanently welded together. This dielectric process assures aleak proofself-supportingpocket. Noneedleholesfordirt migration downstream. The self-supporting pockets withstand the most severe environmental operating conditions. SPOR-AX -NO EARLY CHANGE OUTS Spor-Ax antimicrobial is a proven, highly effective biocide which controls growth of mold, mildew, algae and fungi on the filter. Mold build up on filter media will increase resistance.
No early or unanticipated filter purchases and change outs.

View Technical Sheet View Available Sizes & Prices

Multi-wedge 65 S | MFG: Fiberbond

Fiber Bond Multi-Wedge filters are made with a tough, high density polyester media manufactured at Fiber Bond.
Resistant to high humidity, oil mists, acids, alkalies and most organic solvents.

HEAT SEAL CONSTRUCTION
All perimeter edges and internal dividers are permanently welded together. This dielectric process assures a leak proof self-supporting pocket. No needle holes fordirt migration downstream. SELF-SEAL FRONT LOAD DESIGN The positive edge self sealing design is used in conventional front access systems. The overlappingmedia tightlypressure fits against the holding frame. No by-pass around the filter.

SPOR-AX - NO EARLY CHANGE OUTS
Spor-Ax controls the growth of mold, mildew, algae and fungion the filter.Otherwise, mold buildupon filter media will increase resistance. No early or unanticipated filter purchases andchange out.

View Technical Sheet View Available Sizes & Prices

Multi-wedge 85 | MFG: Fiberbond

Fiberbond Multi-Wedge 85 ~ Self-Supporting Pockets: pockets stay erect at any airflow, even shut down. No pocket stress. 100% Synthetic Media: non-shedding, non-carcinogenic. Welded Pocket Seals: no dirt leakage, no needle holes Spor-Ax Antimicrobial: controls growth of mold, mildew, algae and fungi on the filter. No premature change out.

View Technical Sheet View Available Sizes & Prices

Multi-wedge 95 | MFG: Fiberbond

Fiberbond Multi-Wedge 95 ~ Self-Supporting Pockets: pockets stay erect at any airflow, even shut down. No pocket stress. 100% Synthetic Media: non-shedding, non-carcinogenic. Welded Pocket Seals: no dirt leakage, no needle holes Spor-Ax Antimicrobial: controls growth of mold, mildew, algae and fungi on the filter. No premature change out.

View Technical Sheet View Available Sizes & Prices

Soniq Bag | MFG: Filtration Group

Filtration Groups Aerostar SoniQ pocket Filter ~ offers high efficiency filtration while maintaining low resistance to airflow. The non-shed media eliminates fiber migration downstream and the ultrasonic welding provides lower resistance with no disruption to the integrity of the filter. The open throat design and the precise pocket spacing produces a product that is aerodynamically balanced and provides excellent all-round performance. ~ the SoniQ Pocket Filters are designed as primary or secondary filters in heating, ventilation and air conditioning systems. Superior dust-holding capacities allow these filters to be used in most commercial and industrial applications as well as hospitals, automotive plants and biotechnology facilities. ~ Certain specialty applications such as oil mist, fume and grease collection require Fiberglass or Class 1 Pocket Filters. SoniQ Pocket Filters can be sued in most standard built-up filter banks or side-access housing systems.

View Technical Sheet View Available Sizes & Prices

440 Bag Filter | MFG: ViskonAire

Viskon-Aire Series 440 Filters are used in office buildings, hospitals, manufacturing plants and all applications where long life and high efficiency are required. Series 440 Filters are used with or without the optional header frame to replace all types of extended surface filters such as cubes, supported multi-pocket, and pleated filters. ~ The unique filter media and exclusive PBT-32 Tackifier give the Seris 440 Filter tremendous dust holding capacity and considerably greater service life than competitive medium efficiency filters. The self-gasketing feature is designed with the compressed media acting as a gasket so that a force fit against the holding frame will eliminate by-pass. ~ Easy installation: preformed filter fits into existing frames with ease. There is no basket to install or retainer clips to become lost or damaged when the filter must be changed. Filters are packaged with the pockets folded. When installed, the pockets spring open and are self-supporting. Series 440 filters are available in an extensive number of standard sizes as well as special sizes upon request.

View Technical Sheet View Available Sizes & Prices

Fiberglass Bag Filters | MFG: ViskonAire

ViskonAire Fiberglass Bags ~ Whether it’s bacteria, mold spores and pollen: or equipment damaging and wall staining dust you have to remove from the air, Viskon-Aire High Efficiency Filters give you three certified efficiencies to choose from. ~ With a low initial pressure drop, and a design that allows the fullest use of media, you save energy, and dollars too. ~ High Efficiency _ A higher practical efficiency is achieved because of longer filter life. Each time filters are changed efficiency is reduced to their clean efficiency. Longer filter life means that filters are operating longer at higher efficiency.

View Technical Sheet View Available Sizes & Prices

Revolution Bag | MFG: ViskonAire

8 pocket Revolution Synthetic Bag Filter

View Technical Sheet View Available Sizes & Prices

Synthetic Bag Filter AS | MFG: ViskonAire

Viskon-Aire ~ AS Series ~ These filters provide low initial pressure drop, high dust holding capacity, and a long service life. The “AS” series extended surface filters are ideal for applications requiring an absence of glass micro fibers and economical price. ~ The multiple layered construction of the “AS: series product enhances depth loading to achieve full media utilization and the longest service life possible. The combination of new synthetic technology and established manufacturing techniques used in the “AS” series filter has produced the best value filter on the market. The “AS” series filters are available in 45%, 65%, 85%, and 95% efficiencies. These filters are available in an extensive list of standard sizes as well as special sizes upon request. ~ “AS” series filters are constructed for performance and durability; each pocket is formed with individual pocket spacers and a thermoplastic sealant to ensure leak free construction. Each pocket is adhesive bonded to a corrosion resistant metal frame. With state of the art stitching equipment, very consistent media control stitching is achieved to allow for full media utilization.

View Technical Sheet View Available Sizes & Prices


Main Office: 15 Adams Street - Burlington, MA 08103 | CT Office: 15 Kimberly Ave - New Haven, CT 06516 | Toll Free 800:848-9305



Filter-Replacement Plans Save Energy Improve IAQ
Post on:03/21/2014
Filter Facts: Improve IAQ, Lower Energy Costs
Post on:04/18/2014
Air Filtration for Healthcare Facilities
Post on:04/22/2014
Regular HVAC Filter Changes Saves $$
Post on:10/06/2014